Sparks Flying? Time For Professional Electrical Services In Roslyn Harbor, NY

Circuit Breaker Problems

Circuit breakers are designed to trip when a circuit is overloaded. By shutting off the electrical supply, the breaker prevents wires from overheating and potentially starting a fire.
Breakers can also trip when they become old. Occasional tripping can indicate simple overloads. Try plugging the appliance into a different circuit. If a circuit breaker trips frequently, you should consult an electrician. Working inside an electrical panel requires skill. Even with the main breaker shut off, electrical power is still entering the panel. Leave this type of work to professional electrical contractors.

Electrical Shocks

If you feel a mild shock or tingle when touching an appliance, a ground fault in the appliance or improper electrical wiring may be the cause. If you notice a shock after crossing a carpeted surface, it may be from static, which is common in the winter and not cause for concern. You should, however, take other types of electrical shock seriously as you don’t want to risk the situation becoming worse. Call a professional electrician.

Hot Ceiling Fixtures

You should occasionally check the area around your ceiling light fixtures for warmth because not all fixtures are well insulated. In addition, if you exceed the maximum recommended wattage for the bulb, the fixture can overheat. Too much heat buildup could pose a fire hazard. Switching to compact fluorescent light (CFL) or light-emitting diode (LED) bulbs provides one solution because these bulbs don’t produce as much heat as incandescent bulbs.

Flickering Lights

Flickering lights may be a sign of a defective or loose light bulb. If replacing the bulb doesn’t solve the problem, consult a licensed electrician. The fault may be in the light fixture. Also, either the connections to the fixture or you are in Roslyn Harbor home electrical wiring in the circuit breaker box may be loose. This type of electrical problem requires professional diagnosis to ensure a complete repair.

Light Switches and Outlets Not Working Properly

Light switches or receptacles that work only intermittently give away another home electrical problem. The wiring may be loose or the device may be cracked internally. If a plug is loose in a receptacle, it can pose a problem as well. If the plug partially falls out, an unsuspecting individual could accidentally receive a shock when unplugging the cord. If you suspect this is the case, hire one of our professional electricians in Nassau to inspect your wiring to determine whether any loose connections exist, and replace any defective devices.

Burning Odors or Sparks

If you notice a burning odor coming from any outlets or switches, turn the power off at the electrical panel. Contact a qualified electrician for appropriate repairs. The problem may be a faulty device, but it could also be a wiring or overload problem. A burning smell is a serious issue because it could indicate the start of an electrical fire. Receptacles or connected electrical cords that are warm to the touch are also a sign of an electrical problem. Do not use the receptacle until the situation has been repaired by a Roslyn Harbor electrician.

Occasional sparks when you first plug in an appliance are not unusual. Sparks that are large or happen frequently will indicate a problem with your outlet or the circuit. If you hear a popping sound, it may signal that a wire may be loose. Locating the loose wire in a circuit isn’t always easy. Diagnosing and repairing electrical problems can be tricky, so you’ll need to follow safety procedures for all electrical services.